Cd-substituted Mg composites with dual-equivalent permeability and permittivity for high-frequency miniaturization antennas

Spinel Mg ferrites Mg_1-xCd_xCo_0.05Fe_1.95O₄ (x=0.0, 0.2, 0.3 and 0.4) as potential agents for the miniaturization of high frequency antennas are presented. All the synthesized compositions were experimentally revealed to possess pure spinel phase. Dual-equivalent permeability and permittivity (μ'≈26, ε'≈25, x=0.3 and μ'≈29, ε'≈28, x=0.4) from 5 to 100 MHz can be achieved by introducing Cd²⁺ ions, yielding large miniaturization factors of up to 25 and 28. To figure out the effects of Cd²⁺ ions substitution on magnetic and dielectric properties, the change in microstructure is mainly investigated. Meanwhile, enhanced magnetic properties including upward saturation magnetization (Ms) (approximately 47.60 emu/g) and reduced coercivity (approximately 54.22 Oe) are obtained due to increased grain size and denser microstructure arrangements reflected from scanning electron microscopy images. With low magnitude order of magnetic and dielectric losses factors (tanδ_ε reaches 10^-4, tanδ_μ reaches 10^-2), the composites can potentially exhibit high operating efficiencies at high frequencies.     

巨型工程机械子午线轮胎高强度、低生热胎面基部胶配方开发

通过对国外知名品牌37.00R57和40.00R57规格巨型工程机械子午线轮胎胎面基部胶组成分析和物理性能测试,对我公司巨型工程机械子午线轮胎胎面基部胶配方进行优化设计。新开发配方半成品和成品胶料动态损耗因子分别降低37.9%和26.6%,胶料物理性能达到竞品水平,成品轮胎TKPH提升13.6%。     

Microwave bandpass filter by feedback interference topology

This paper proposes a signal feedback interference topology to control the characteristics of a coupled line bandpass filter. Control is carried out by varying the ratio of the transmission line parameters of the forward and the feedback couplers. The topology produces a compact filter that does not require a complicated design or fabrication. The results of the insertion and return losses show that the feedback‐controlled design has desirable features in terms of the design frequency, fractional bandwidth, stopband rejection level, roll‐off rate and insertion loss. The test results of the fabricated prototype achieved good agreement with the simulation results of the ideal transmission line design model. Several microwave, modern wireless and mobile/satellite communication systems may benefit from such a filter design due to its compactness and flexibility.     

磁性辊轮驱动装置在切割生产线中的应用

随着汽车及机床行业的发展,板料涂油工艺在汽车零部件生产中应用广泛,从而导致板料在自动切割生产过程中极易打滑跑偏,无法保证传输精度,本文所阐述的磁性辊轮驱动装置从根本上有效解决了此问题,在切割生产线中有广泛的推广价值。     

水煤浆管道输送摩阻损失研究

以十二醇醚为分散剂,进行了水煤浆管道输送实验研究,分析了分散剂浓度和煤浆浓度变化对煤浆摩阻损失的影响。煤浆管道输送数据分析及理论计算结果表明: 分散剂浓度越大,煤浆摩阻损失值越小; 水煤浆浓度越大,摩阻损失值越大。实验数据拟合结果表明有效黏度与平均切变率成线性关系,从理论上给出了煤浆摩阻损失的计算公式,计算值与实测值偏差不大于18%。     

基于Romax行星齿轮传动振动特性仿真分析

以某行星齿轮传动为研究对象,分析行星齿轮传动原理;建立行星齿轮三维模型,导入仿真软件Romax对行星齿轮传动模态、固定内齿圈振动加速度、振动速度等振动特性进行仿真分析。仿真结果表明:行星齿轮传动不同阶数下的振动频率、振型和振动总位移不同;行星齿轮传动固定内齿圈的振动加速度、振动速度都呈现在某一均值波动的情况。该研究为避免行星齿轮传动发生共振、减小振动噪声及增加疲劳寿命提供理论依据。     

Optimal filtering and control for wireless networked closed-loop control systems

This article studies the optimal filtering and control for wireless networked control systems (WNCSs). In WNCSs, packets may be lost in both control and feedback channels and user datagram protocol is usually used to improve the performance of the real-time control. Relevant literature indicates that the conventional optimal filtering for such a system cannot be applied in practice due to the complex calculation with Gaussian mixtures. This paper proposes a novel scheme to realize the optimal filtering and the linear quadratic Gaussian control for WNCSs, in which the controlled node performs a local estimation and the remote-control node performs the final estimation and control, and a synchronization of two estimators is guaranteed by a communication mechanism. An optimal filtering algorithm is developed, the stability condition of the filtering error covariance is obtained, optimal finite-horizon and infinite-horizon control are derived, and the stability of the closed-loop control system is proved. Numerical simulations show the validity and feasibility of the theoretical results.     

新时期广播电视技术维护工作的特点分析

阐述广播电视技术维护的重要意义,同时从多角度出发,分析新时期广播电视技术维护工作的主要特点。     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

Effects of structural characteristics on microwave dielectric properties of low-loss (Zn1-xNix)ZrNbTaO8 ceramics

Low-loss (Zn_1-xNi_x)ZrNbTaO₈ (0.02?≤?x?≤?0.10) ceramics possessing single wolframite structure are initiatively synthesized by solid-state route. Based on the results of Rietveld refinement, complex chemical bond theory is used to establish the correlation between structural characteristics and microwave performance in this ceramic system. A small amount of Ni²⁺ (x?=?0.06) in A-site with the fixed substitution of Ta⁵⁺ in B-site can effectually raise the Q?×?f value of ZnZrNb₂O₈ ceramic, embodying a dense microstructure and high lattice energy. The dielectric constant and τ_f are mainly affected by bond ionicity and the average octahedral distortion. The (Zn_0.94Ni_0.06)ZrNbTaO₈ ceramic sample sintered at 1150?°C for 3?h exhibits an outstanding combination of microwave dielectric properties: ε_r =?27.88, Q?×?f?=?128,951?GHz, τ_f =?–39.9?ppm/°C. Thus, it is considered to be a candidate material for the communication device applications at high frequency.